46th International Conference on VIBROENGINEERING
St. Petersburg, Russia

Nonlinear Dynamics and Chaos in Engineering Applications

Date
June 29 - July 1, 2020
Conference format
Online

46th International Conference on VIBROENGINEERING

46th International Conference on VIBROENGINEERING is an integral part of Vibroengineering Series Conferences and was held in St. Petersburg, Russia.

Conference was dedicated to researchers, scientists, engineers and practitioners throughout the world to present their latest research results, foster discussion, new ideas and develop partnerships. All JVE Conferences are integral part of the Series of Vibroengineering Conferences started in 1999. Vibroengineering Procedia is indexed in major scientific databases: Scopus, EI Compendex, Inspec, Gale Cengage, Google Scholar and EBSCO.

JVE conferences feature a broad range of high-level technical presentations, vibrant discussions and key experts and scientists from all over the world. The conference provides an opportunity to communicate your recent research advances, exchange ideas in innovative engineering technologies and enjoy endless networking advantages.

Organizing Comittee

Leonid Abramovich Vaisberg
Chair of the Conference
Prof. Leonid Abramovich Vaisberg
D.Eng., Professor, Academician of RAS, Academic Advisor of Research and Engineering Corporation Mekhanobr-tekhnika (REC "Mekhanobr-tekhnika")
Minvydas Ragulskis
Chair of the Conference
Prof. Dr. Minvydas Ragulskis
Kaunas University of Technology, Lithuania
Prof. L. A. Vaisberg
Prof. L. A. Vaisberg
D.Eng., Professor, Academician of RAS, Academic Advisor of Research and Engineering Corporation Mekhanobr-tekhnika (REC "Mekhanobr-tekhnika")
Prof. G. Panovko
Prof. G. Panovko
D.Eng., Professor, Head of Vibroengineering Laboratory in A.A. Blagonravov Institute for Problems in Mechanical Engineering Research Institute of the RAS (IMASH RAN)
Prof. D. A. Indeytsev
Prof. D. A. Indeytsev
D.Ph.-Mat.Sc., Professor, Associate Member of RAS, Academic Advisor of Institute for Problems in Mechanical Engineering of RAS (IPME), Head of Department in Peter the Great St. Petersburg Polytechnic University
Prof. A. V. Vasiliev
Prof. A. V. Vasiliev
D.Eng., Professor, Head of Department in Samara State Technical University
Prof. V. I. Erofeev
Prof. V. I. Erofeev
D.Ph.-Mat.Sc., Professor, Director of IPME RAS, Nizhny Novgorod
Vladimir Babitsky
Vladimir Babitsky
Loughborough University, United Kingdom
Mahmoud Bayat
Mahmoud Bayat
The University of Texas at Arlington, USA
Iliya I. Blekhman
Iliya I. Blekhman
Russian Academy of Sciences, Russia
Kouamana Bousson
Kouamana Bousson
University of Beira Interior, Portugal
M. Brennan
M. Brennan
University of Southampton, United Kingdom
Rafał Burdzik
Rafał Burdzik
Silesian University of Technology, Poland
Maosen Cao
Maosen Cao
Hohai University, China
Feliks Chernousko
Feliks Chernousko
Institute for Problems in Mechanics, Russia
Zbigniew Dabrowski
Zbigniew Dabrowski
Warsaw University of Technology, Poland
Y. Davydov
Y. Davydov
Institute of Machine Building Mechanics, Russia
Joze Duhovnik
Joze Duhovnik
University of Ljubljana, Slovenia
Ameen El Sinawi
Ameen El Sinawi
The Petroleum Institute, United Arab Emirates
Rivner Ganiev
Rivner Ganiev
Blagonravov Mechanical Engineering Research Institute, Russia
W. H. Hsieh
W. H. Hsieh
National Formosa University, Taiwan
Chen Lu
Chen Lu
Beihang University, China
Vadim Lyalin
Vadim Lyalin
Izhevsk State Technical University, Russia
Yuxin Mao
Yuxin Mao
Zhejiang Gongshang University, China
Rimas Maskeliūnas
Rimas Maskeliūnas
Vilnius Gediminas Technical University, Lithuania
Luis E. Muñoz
Luis E. Muñoz
Universidad de los Andes, Colombia
Grigory Panovko
Grigory Panovko
Mechanical Engineering Research Institute of the Russian Academy of Sciences, Russia
N. Perkins
N. Perkins
University of Michigan, USA
Lei Qiu
Lei Qiu
Nanjing University of Aeronautics and Astronautics, China
Subhash Rakheja
Subhash Rakheja
Concordia University, Canada
Miguel A. F. Sanjuan
Miguel A. F. Sanjuan
University Rey Juan Carlos, Spain
Gangbing Song
Gangbing Song
University of Houston, USA
Shigeki Toyama
Shigeki Toyama
Tokyo A&T University, Japan
Kenji Uchino
Kenji Uchino
The Pennsylvania State University, USA
Piotr Vasiljev
Piotr Vasiljev
Lithuanian University of Educational Sciences, Lithuania
Vincentas Veikutis
Vincentas Veikutis
Lithuanian University of Health Sciences, Lithuania
Jānis Vība
Jānis Vība
Riga Technical University, Latvia
Vitalijus Volkovas
Vitalijus Volkovas
Kaunas University of Technology, Lithuania
Jörg Wallaschek
Jörg Wallaschek
Leibniz University Hannover, Germany

Conference Program

Introduction Monday, June 29 - Online
10:00-10:15
Welcome presentation
Prof. Minvydas Ragulskis (Editor in Chief of Vibroengineering Procedia)
Presentations Monday, June 29 - Online
10:15-10:30
Slow oscillations in systems with inertial vibration exciters
Nikolai Yaroshevich (Lutsk National Technical University, Ukraine)
10:30-10:45
Modal finite element analysis of PCBs and the role of material anisotropy
Uday H. Kalyani (Mechanical and Electronic Engineering, Institute of Technology Carlow, Ireland)
10:45-11:00
Imitation model of unbalanced rotor on fluid-film bearings
Alexander Babin (Orel State University, Russia)
11:00-11:15
Development of the vibratory injection theory
Ivan Demidov (REC "Mekhanobr-Tekhnika", Russia)
11:15-11:30
Machine learning for rotating machines: simulation, diagnosis and control
Alexey Kornaev (Orel State University named after I.S. Turgenev, Russian Federation)
11:30-11:45
Road handling improvement through active yaw control system using feedforward sliding mode controller
Vijayapragas Muniandy
11:45-12:00
On the use of Maggi’s equation in the dynamic modeling of multibody systems
Fernando Malvezzi (Maua Institute of Technology, Brazil)
12:00-12:15
Non linear dynamics of a thin narrow ribbon in an airflow
Alexandra Afanaseva (Mechanical Engineering Research Institute of the Russian Academy of Sciences, Russia)
12:15-12:30
Analysis of movements and degrees of freedom required for a vibration attenuation system on ambulance stretchers
Fernando Malvezzi (Maua Institute of Technology, Brazil)
12:30-12:45
Energy consumption in the manufacture of metal powders by vibratory disintegration methods
Sergei Dmitriev (REC "Mekhanobr-Tekhnika", Russia)
12:45-13:00
Nonlinear dynamic analysis of GTF gearbox
Siyu Wang (Nanjing University of Aeronautics and Astronautics, China)
13:00-13:15
Engineering model of the vibrational transportation process
Leonid Blekhman (REC "Mekhanobr-Tekhnika", Russia)
13:15-13:30
Realization of electrical signal monitoring of metal surface modification by means of low-temperature plasma treatment
Elena Zinina (Mechanical Engineering Research Institute of the Russian Academy of Sciences, Russia)
13:30-13:45
Vibration effects on colloidal three-phase systems
Andrei Gerasimov (REC "Mekhanobr-Tekhnika", Russia)
13:45-14:00
Effect of temperature on dynamic behavior of cracked metallic and composite beam
Mainul Hossain (Institute of Mathematics and Statistics, Estonia)
14:00-14:15
Kinematics analysis on pneumatic flexible finger
Hongbo Liu (Changchun University of Science and Technology, China)
14:15-14:30
Dynamic analysis of atomic force microscope in tapping mode
Mohammad Reza Bahrami (Innopolis University, Russia)
14:30-14:45
Stochastic model of the stroke of a two-mass cone crusher
Petr Morozov (REC "Mekhanobr-Tekhnika", Russia)
14:45-15:00
Influence of the metal chips disintegration method on the physical and mechanical properties of metal powders obtained
Margarita Cherkasova (REC "Mekhanobr-Tekhnika", Russia)

Sponsors and Partners

Conference in St. Petersburg, Russia was organized by JVE International with the partnership of Research and Engineering Corporation Mekhanobr-tekhnika, Mechanical Engineering Research Institute of the Russian Academy of Sciences (IMASH RAN) and Saint Petersburg State Marine Technical University (SMTU).

Research and Engineering Corporation

Research and Engineering Corporation "Mekhanobr-tekhnika" incorporates the whole manufacturing facilities of the former Mekhanobr Institute, which was founded in 1916. At the beginning of the institute activity its engineers designed the simplest machines for concentration of coal and shale. Today Mekhanobr-tekhnika is reputed as a designer and manufacturer of innovative crushing, screening, classifying and concentrating equipment for minerals processing. Today it supplies its products to the scores of countries in the world.

Mechanical Engineering Research Institute of the Russian Academy of Sciences (IMASH RAN)

Mechanical Engineering Research Institute of the Russian Academy of Sciences (IMASH RAN) is a respected both in Russia and abroad institution, that solves fundamental research problems in the field of machine science and engineering sciences in Russia. Discoveries made and solutions found in its walls, are being laid as cornerstones for the basic trends of domestic mechanical engineering. On these solutions and developments rests the future of most industries: machine-tool manufacture, agricultural, metallurgical, automotive, energy, petrochemical, aviation, space rocket, nuclear, defense and robotics engineering.

Saint Petersburg State Marine Technical University (SMTU)

Saint Petersburg State Marine Technical University (SMTU) is a legendary University with deep traditions and dynamically growing prospects. SMTU is the only university in Russia that trains world-class engineers for all shipbuilding specialties and high-class economists, managers, lawyers and sociologists for business sphere. The main directions are the design, construction and technical operation of ships, surface warships and submarines, as well as technical means to ensure the exploration and production of oil, gas and other minerals on the seabed.